4.85 10.16 10.16 0.20 3.0 30.00 5.0 diam. 3.5 1.0 8.00 5.7 9.8 + 4.60 2.54 position 1 2 3 SSA-099 5mm led assembly 3 way SSA-099 is a three element arrays of 5mm leds mounted at 10.16mm pitch. leads are bent at right angles and cropped. the housing is black nylon 6 v0 rated. ? leds of each colour are matched for brightness and hue-within arrays and array to array. ? colour combination and polarity to customer?s choice. ? cropped leads 3.5mm standard, other lengths available. ? regular 10.16mm pitch for tidy front panel presentation. ? labour saving on assembly. mechanical data bedford opto technology ltd 1.biggar business park, bigg ar,lanarkshire, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk 4.4.00 iss a pb this component is rohs compliant
bedford opto te chnology ltd 1,biggar business park, bi ggar,lanarkshire, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk absolute maximum ratings (t a = 25 o c) parameter high efficiency red yellow green units continuous forward current 20 20 25 ma forward current surge (pulse width 1ms, duty 1/5) 60 60 60 ma power dissipation tamb<60 c 60 60 75 mw reverse voltage 5 5 5 v storage temp -30 to +100 o c soldering temperature (1.6mm below body for 5 sec) operating temp -25 to +85 o c ordering information SSA-099 x x x where 1st x = 1st elementx = r = red y = yellow g = green colour luminous intensity mcd viewing angle (1) deg peak wavelength nm forward voltage volts reverse current vr = 3v a red min typ max 2.2 6.3 - 40 650 2.0 3.0 10 yellow min typ max 2.2 6.3 - 40 585 2.1 3.0 10 green min typ max 3.6 10 - 40 563 2.1 3.0 10 opto electronic data (if = 10ma) notes: 1 viewing angle is the off-axis angle at which luminous intensity is half the axial luminous intensity. ssa099 6.2.00 iss a pb this component is rohs compliant
|